Equipment Wanted









Gastech verticalScantrol vertical
Gastech horizontalScantrol horizontal

Wanted Construction

Wanted
Construction
ID: 178

Horizontal Carousel

Horizontal carousel required with internal diameter (ID) 31m and outer diameter (OD) 40mm and load rating of 425 mTe. MBR of product is 15m.

 
Location:

Wanted ROV/RIT

Wanted
ROV/RIT
ID: 174

Focal 180 Model Slipring

Focal underwater slipring unit required urgently. Moog focal p/n 180-1588-00 suitable for use in a TMS for a Sub-Atlantic Apache ROV or similar.

 
Location:

Wanted Construction

Wanted
Construction
ID: 149

Pipelay Stinger

Pipelay stinger suitable for 10 - 12 inch pipe in <100 metre water depths. Would consider something similar to modify, ideally 2 to 3 sections. Make contact for further information.

 
Location:

Wanted ROV/RIT

Wanted
ROV/RIT
ID: 131

Umbilical winch

Umbilical winch required for use as umbilical feeder only, and should be capable of pulling approx 1,500m umbilical of approx 5,4kg/m in seawater. Estimated suitable min lifting capacity approx 10 - 12Ton. Minimum drum diameter to be 172cm minimum and overall dimensions not to exceed 6m (L) x 2.5m (W) x 3m (H) due to road transport limitation). Frame must be sufficient for lifting winch and umbilical payload of approx 10T.


 
Location:

Wanted ROV/RIT

Wanted
ROV/RIT
ID: 176

Constant Tension Winch with slip-ring

16inch minimum core diameter. Prefer level-wind with intent to spool 3,000m of 10mm light umbilical

 
Location: