Equipment Wanted









Wanted Construction

Wanted
Construction
ID: 155

Transport and Installation Reels

2-off Product Storage and installation Reels required to purchase. Must be 3rd party certified and have RDS hub interface. Required for payload of TCP with weights around 50T empty and 100T with water.  Indicative sizes: Overall Flange Diameter = 9800-10200mm, Overall Width = 6080mm, Core Diameter 6600mm and Core Width = 5000mm. Contact us for further information.

 
Location:

Wanted Piping

Wanted
Piping
ID: 152

Pulled / Used Casing

We are looking to purchase parcels of used / pulled casing tubes ideally in the following sizes.

5 1/2 inch   x   17 / 20 / 23 lbs per foot

6 5/8 inch  x    24 / 28 lbs per foot

7 inch          x   26 / 29 / 32 lbs per foot

7 5/8 inch   x   29 / 33 lbs per foot 

8 5/8 Inch  x  36 / 40 lbs per foot

9 5/8 inch  x  47 / 53 lbs per foot


 
Location:

Wanted Construction

Wanted
Construction
ID: 150

Pipe Tensioner

Tensioner required, up to 70 tonnes considered. Contact buyer for further information.

 
Location:

Wanted ROV/RIT

Wanted
ROV/RIT
ID: 135

Seaeye Falcon ROV System

Complete Seaeye Falcon ROV System wanted. Must be used but reasonable condition. Contact buyer.

 
Location:

Wanted ROV/RIT

Wanted
ROV/RIT
ID: 131

Umbilical winch

Umbilical winch required for use as umbilical feeder only, and should be capable of pulling approx 1,500m umbilical of approx 5,4kg/m in seawater. Estimated suitable min lifting capacity approx 10 - 12Ton. Frame must be sufficient for lifting winch and umbilical payload of approx 10T.


 
Location:

Wanted ROV/RIT

Wanted
ROV/RIT
ID: 83

Schilling T4 slave plus Manipulator

Looking for a Schilling T4 slave arm with service history along with either a TA16 or Rigmaster manipulator.
 
Location: