Equipment Wanted









Wanted Survey

Shallow Water Multibeam Echosounder

Survey

Looking for shallow water multi beam echosounder like:

- Kongsberg Geoswath+,

- Ping 3DSS,

- Norbit WBMS,

etc.


Location:
 
 

Wanted Construction

Pipe Tensioner

Construction

Tensioner required, up to 70 tonnes considered. Contact buyer for further information.

Location:
 
 

Wanted Construction

Pipelay Stinger

Construction

Pipelay stinger suitable for 10 - 12 inch pipe in <100 metre water depths. Would consider something similar to modify, ideally 2 to 3 sections. Make contact for further information.

Location:
 
 

Wanted ROV/RIT

ORION 7P ROV Manipulator

ROV/RIT
We are looking for a Schilling ORION 7P manipulator (new or second-hand). Contact buyer for further information.
Location:
 
 

Wanted ROV/RIT

Seaeye Falcon ROV System

ROV/RIT

Complete Seaeye Falcon ROV System wanted. Must be used but reasonable condition. Contact buyer.

Location:
 
 

Wanted Cranes/Lifting

UNIC Spider Crane

Cranes/Lifting

UNIC spider crane model UEW-376 wanted to purchase. Contact buyer for further details.

Location:
 
 

Wanted ROV/RIT

Umbilical winch

ROV/RIT
Umbilical winch required for use as umbilical feeder only, and should be capable of pulling approx 1,500m umbilical of approx 5,4kg/m in seawater. Estimated suitable min lifting capacity approx 10 - 12Ton. Frame must be sufficient for lifting winch and umbilical payload of approx 10T.


Location:
 
 

Wanted Diving

Saturation Diving Chamber

Diving
Looking for all type of Diving Decompression Chambers, irrespective of working pressure, diameter, age, certification and location. 
Location:
 
 

Wanted Survey

Transponders/Transceivers

Survey
Looking for the following equipment:
Transponders AAE model 945 +/- 45 degree 200db (2x), Transponders AAE model 949 +/- 90 degree 190db (2x), PAM tester 252, Usbl 7769 Transceivers 
Location:
 
 

Wanted ROV/RIT

Schilling T4 slave plus Manipulator

ROV/RIT
Looking for a Schilling T4 slave arm with service history along with either a TA16 or Rigmaster manipulator.
Location:
 
 

Wanted Power Generation

Siemens SGT-300 Gas turbine

Power Generation
Siemens SGT-300 Gas turbine required. Contact buyer for further information.
Location:
 
 

Wanted Piping

Pulled / Used Casing

Piping

We are looking to purchase parcels of used / pulled casing tubes ideally in the following sizes.

5 1/2 inch   x   17 / 20 / 23 lbs per foot

6 5/8 inch  x    24 / 28 lbs per foot

7 inch          x   26 / 29 / 32 lbs per foot

7 5/8 inch   x   29 / 33 lbs per foot 

8 5/8 Inch  x  36 / 40 lbs per foot

9 5/8 inch  x  47 / 53 lbs per foot


Location:
 
 

Wanted Diving

Air Diving Spread

Diving

Full Air Diving Spread required with DDC + 2 LARS including two diver baskets. Contact buyer for more details.

Location:
 
 

Wanted Top Drive

Used TDS-11SA Top drive

Top Drive

Looking for Used TDS-11SA top drive

Location:
 
 

Wanted Vessel Part

Bridge radar S-band

Vessel Part
Marine Offshore Vessel Operator looking for a DECCA E-SERIES RADAR - Processor Unit: Type no. 65800RARS, Serial No. : FB62640/2 - Qty 1 ea - refurbished, second or equivalent.
Location:
 
 

Wanted Well Operation

Spinner Array Tool (SAT)

Well Operation
The Spinner Array Tool features six miniature turbines deployed on bow- spring arms, enabling discrete local fluid velocities to be measured at 60 degree intervals around the wellbore. Spares for this tool also considered.
Location:
 
 

Wanted Well Operation

Resistance Array Tool

Well Operation
GE manufactured Resistance Array Tool (RAT). Used to determine the water holdup profile across the whole wellbore. 
Location:
 
 
Spares for CAST-V

Spares for CAST-V

Wireline
Spares required (as per attached 2 files) for Halliburton CAST V (Circumferential Acoustic Scanning Tool). Typical Primary applications of this tool include:• Casing Inspection (both Thickness and Diameter)• Ultrasonic Cement Evaluation/ Imaging• Openhole Borehole Imaging• Fracture Detection, the CAST-V
Location:
 
 

Wanted Pipeline/Riser

Flowline for Field Dev. Project

Pipeline/Riser
Oil company looking for opportunities to acquire 10km flowline (dynamic and/or static): 6” ID with working pressure of 100 bar maximum and working temperature: ~60°C; fluid produced: oil - no H2S.
Location:
 
 

Wanted Construction

3km Wire Rope

Construction
3km of used wire rope required for use as on-bottom stability system. Details as follows: i) Wire rope, submerged weight 28.7 kg/m, approx 37.7 kg/m in air, ii) Preferably polymer sheathed but may consider unsheathed, iii) Approx. length 2,900m but may be in batches connected with shackles &, iv) No further requirements for strength, steel type or certification.

Location:
 
 

Wanted Production Systems

6" Manifold, 6 - 10 slots

Production Systems
Oil company looking for opportunities to acquire 6” manifold: 6-10 slots; 6” ID with working pressure of 100 bar maximum and working temperature: ~60°C; fluid produced: oil - no H2S
Location: