Level sensor

LEVEL SENSOR LA SERIES(model:LA-HS/TP3 (Quantity 6set)
Price
Make an offer
Equipment Info
Manufacturer
JOWA USA
Year built
2017
Condition
New or Unused
Terms
Contact seller
Part No
2028977
Location
CHITTAGONG BANGLADESH
ID
2344
Seller 
User Since
April 2020
USER RATING

73%

Typically replies in 24 hours
Share

Details

Sensor Length:   1 to 36 meters or 3 to 120 feet. Temperature Range:  -15° to 60°C (5° to 140°F). Wetted  Materials:    Polypropylene,  304  Stainless  Steel and Glass-Filled Polypropylene. Active  Helix:  Starts  270  mm  (10.6  in)  from  sensor  zero, extends  to  approximately  37  mm  (1.5  in)  from  sensor bottom. Helix Resolution:  5 mm (1/4 inch). Actuation  Depth:  Nominal  145  mm  (5.7  inch)  head  of water, offset at calibration. Specific  Gravity  Effect:  1%  increase  in  SG  causes nominal  1.5  mm  increase  in  indicated  level,  (can  be calibrated). Resistance  Gradient:  1000Ω/meter  (305Ω/ft),  ±  1.5%.  Actual  value  supplied  and  effect  removed  at  calibration. Helix Temperature Coefficient:  40 ppm/°C. Frequency Response:  0 to 0.1 Hz at 1 m amplitude. Sensor  Filter:    Polypropylene,  HDPE  and Acetal.    Filter life  of  24  to  48  months,  depending  upon  application  and level cycle activity. Pressure Equalization:  Direct equalization ± 1 atm. Temperature  Detectors:  Up  to  three  RTDs  per  sensor,  2-wire  1000Ω  platinum  (TP).  Located  .6  m  (2.0') from  bottom,  3  m  (9.8')  from  sensor  top,  and  at  50%  of sensor length. Approvals:  When  used  with  approved  zener  barrier,  sensor  is  intrinsically  safe.  FM:  Class  I,  Division  1, Groups C, D. Sensor  Weight:  0.25  kg  (0.55  lb),  plus  0.24  kg/m   (0.15 lb/ft). Sensor  Shipment/Storage: 

Show more
Show less