Constant Tension Winch with slip-ring
16inch minimum core diameter. Prefer level-wind with intent to spool 3,000m of 10mm light umbilical
Shallow Water Multibeam Echosounder
Looking for shallow water multi beam echosounder like:
- Kongsberg Geoswath+,
- Ping 3DSS,
- Norbit WBMS,
Subcomm 2000 through water comms
Company seeking a topside Subcomm 2000 through water comms unit with transponder and cables.
Flex / Umb Vertical Lay System
Looking for a flexible / umbilical Vertical Lay System (VLS) with 50 to 150 mT tension capacity suitable for 4" to approx. 18" OD product.
Prefer a fixed or tiltable system for laying product through a 7.2m x 7.2m vessel moonpool but will also consider a system that needs to be mounted on the vessel side or stern.
Flowline for Field Dev. Project
Horizontal carousel required with internal diameter (ID) 31m and outer diameter (OD) 40mm and load rating of 425 mTe. MBR of product is 15m.
Self-Propelled Hyperbaric Lifeboat required. Contact us for further details.
Seaeye Falcon ROV
we are currently looking for used Seaeye Falcon ROV System, in good working condition" to buy"
50T Subsea Crane
Pipelay stinger suitable for 10 - 12 inch pipe in <100 metre water depths. Would consider something similar to modify, ideally 2 to 3 sections. Make contact for further information.
5mT Tensioner required with diameter ranges roughly from 100m to 325mm.
Transport and Installation Reels
Transport and Installation Reels required for product installation. Equipment and drums in the size of 12.4m diameter and 5 meter with with a load rating of roughly 250 mTe. Other sized reels will be considered.
ORION 7P ROV Manipulator
ROV Umbilical Winch
FPSO Seaflex Offloading Hose
Seaeye Falcon ROV
Focal 180 Model Slipring
Focal underwater slipring unit required urgently. Moog focal p/n 180-1588-00 suitable for use in a TMS for a Sub-Atlantic Apache ROV or similar.
Umbilical winch required for use as umbilical feeder only, and should be capable of pulling approx 1,500m umbilical of approx 5,4kg/m in seawater. Estimated suitable min lifting capacity approx 10 - 12Ton. Minimum drum diameter to be 172cm minimum and overall dimensions not to exceed 6m (L) x 2.5m (W) x 3m (H) due to road transport limitation). Frame must be sufficient for lifting winch and umbilical payload of approx 10T.
10T DCV Crane
U31 ACFM Inspection System
U31 Alternating Current Field Measurement (ACFM) required to purchase for underwater use. U41 system also considered.
WROV umbilical Winch
WROV compact umbilical winch with SWL 8-10t and minimum 1000 m of umbilical 36 mm dia capacity
Reson Seabat 7101
Looking for used Reson Seabat 7101 proccesing unit.